iH1000 Dry Pump 200/208V, 50/60 Hz 3Ø A59030945
iH1000 Dry Pump 200/208V, 50/60 Hz 3Ø A59030945 iH1000 Dry Pump iH Dry Pump EDWARDS Semiconductor Dry Pumps Kuala Lumpur (KL), Malaysia, Selangor, Sri Petaling Distributor, Supplier, Supply, Supplies | Glovac Sdn Bhd
Quantity
Overview:
Edwards advanced semiconductor vacuum pumps have been field-proven to perform to the highest operating standards. Reliability and high performance are achieved by extending service life, improving uptime and increasing productivity, while minimizing footprint and cost of ownership. 
  
The iH Series offers high reliability for difficult processes, such as PECVD and LPCVD, where particulate, condensable and corrosive by-products are present.

Features & Benefits:
  • Optimized utilities consumption.
  • No preventative maintenance required.
  • Cantilevered shafts and specially profiled rotors for better handling of particles.
  • Reserve motor power also maximizes reliability on harsh-duty CVD applications.
  • Corrosion resistant materials allow pumping of corrosive gases.
  • Higher operating temperatures provide ample margin to prevent gas condensation.
  • The one-piece shaft eliminates the need for a motor coupling and a fifth pumping stage removes the need for a silencer and eliminates particle accumulation, both reducing the overall footprint.

Technical Data:


50 Hz 60 Hz
Peak Speed 950 m3h-1 1000 m3h-1
  560 cfm 589 cfm
  15837 l min-1 16670 l min-1
Ultimate Vacuum 2 x 10-3 mbar 1 x 10-3 mbar
  1.5 x 10-3 Torr 7.5 x 10-4 Torr
  0.2 Pa 0.1 Pa
Typical shaft seal nitrogen flow 4 slm 4 slm
Inlet Connection ISO100 ISO100
Outlet Connection NW40 NW40
Typical cooling water flow at 15 psi pressure drop 240 l h-1 240 l h-1
  4 l min-1 4 l min-1
Weight 430 kg 430 kg
Power input at ultimate 3.5 kW 3.8 kW
Rated motor power 5.1 kW 6.1 kW
Oil Capacity 1.48 l 1.48 l

  
All figures are typical without gas ballast.
50 Hz 60 Hz
Peak Speed 950 m3h-1 1000 m3h-1
  560 cfm 589 cfm
  15837 l min-1 16670 l min-1
Ultimate Vacuum 2 x 10-3 mbar 1 x 10-3 mbar
  1.5 x 10-3 Torr 7.5 x 10-4 Torr
  0.2 Pa 0.1 Pa
Typical shaft seal nitrogen flow 4 slm 4 slm
Inlet Connection ISO100 ISO100
Outlet Connection NW40 NW40
Typical cooling water flow at 15 psi pressure drop 240 l h-1 240 l h-1
  4 l min-1 4 l min-1
Weight 430 kg 430 kg
Power input at ultimate 3.5 kW 3.8 kW
Rated motor power 5.1 kW 6.1 kW
Oil Capacity 1.48 l 1.48 l

  
All figures are typical without gas ballast.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version