EDP160 50Hz, Bareshaft Pump A70544000
EDP160 50Hz, Bareshaft Pump A70544000 EDP160 Chemical Dry Pump EDP Dry Pumps EDWARDS Chemical & Process Pumps Kuala Lumpur (KL), Malaysia, Selangor, Sri Petaling Distributor, Supplier, Supply, Supplies | Glovac Sdn Bhd
Quantity
Overview:
EDP pumps are based on Edwards’ oil-free, non-contacting, award-winning, reverse claw mechanism. They provide consistent vacuum at high efficiencies and low costs of ownership. Dry pumps completely eliminate all problems of process contamination and creation of polluted effluent, which are experienced with traditional wet vacuum pump technologies.

Features & Benefits:
  • Staged compression for optimum temperature profile within the pump and no requirement for cooling gas injection
  • Inherently free draining
  • Able to handle liquid or particulate carryover
  • Short gas path eliminates particulate build-up and corrosion - Edwards’ patented design
  • Can flush with solvents, water or steam
  • No internal valves to block or corrode and no interstage condensers to create potential for corrosion
  • Simple robust construction with ample power ensures reliable operation even during process upsets
  • Non-contacting mechanisms gives long life and high reliability
  • Pump flammable gases safely
  • Pump corrosive gases without corroding
  • Designed for long life and easy maintenance - Minimum of 25 years life expectancy
  • Lower cost of ownership

Technical Data:
Maximum pumping speed  
  50 Hz 163 m3h-1 / 96 ft3min-1
  60 Hz 202 m3h-1 / 119 ft3min-1
Capacity at 10 mbar (7.5 Torr)  
  50 Hz 153 m3h-1 / 90 ft3min-1
  60 Hz 198 m3h-1 / 117 ft3min-1
Ultimate vacuum  
  50 Hz 0.5 mbar / 0.4 Torr
  60 Hz 0.3 mbar / 0.2 Torr
Maximum back pressure  
  Standard 1150 mbar / 2.2 psig
  Optional* 1300 mbar / 4.4 psig
Power consumption at 10 mbar (7.5 Torr)  
  50 Hz 4.9 kW / 6.6 hp
  60 Hz 4.9 kW / 6.6 hp
Standard motor (380 – 400 V, 3 ph, 50 Hz) 7.5 kW
Standard motor (200 – 460 V, 3 ph, 60 Hz) 11 hp
Cooling water flow rate (adjustable)  
  50 Hz 1 – 8 l min-1 / 0.3 – 2.1 gal min-1
  60 Hz 1 – 10 l min-1 / 0.3 – 2.6 gal min-1
Cooling water supply pressure 2 – 10 barg / 29 – 145 psig
Seal purge flow (maximum),
regulated to 0.3 - 0.5 barg (5 – 7 psig)
20 l min-1 / 0.7 ft3min-1
Seal purge supply pressure
(minimum - maximum)
2 – 10 barg / 29 – 145 psig
Noise (max. with exhaust silencer) 78 dB(A)
Weight (with frame and standard motor)  
  50 Hz 747 kg / 1647 lbs
  60 Hz 756 kg / 1667 lbs
Inlet 3” ANSI / DN80
Outlet 1.5” ANSI / DN40
Pumping mechanism 3 stage reversed claw

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version