CXS250 ATEX CAT 2&3 T3 Light duty, Protego inlet & exhaust flame arrestors
CXS250 ATEX CAT 2&3 T3 Light duty, Protego inlet & exhaust flame arrestors CXS250 Chemical Dry Pump CXS Chemical Dry Pumps EDWARDS Chemical & Process Pumps Kuala Lumpur (KL), Malaysia, Selangor, Sri Petaling Distributor, Supplier, Supply, Supplies | Glovac Sdn Bhd
Quantity
Overview:
Edwards pioneered the industrial dry vacuum pump in 1986 and now with more than 150,000 systems sold worldwide this Edwards expertise has been used to develop a dry pump capable of withstanding the harshest of process applications.

The CXS incorporates innovative screw design features with simplicity and reliability in mind, a ‘Plug and Pump’ philosophy has been adopted. As a result, the CXS has industry leading reliability, safety and low cost of ownership.

Features & Benefits:
  • Continuous vacuum from atmosphere to 10-3 mbar
  • Integral temperature control
  • Pumps corrosive vapours without deterioration
  • Excellent liquid and solids handling
  • Deeper vacuum than traditional technologies - not limited by seal fluid or cooling water temperature

Technical Data:
Maximum pumping speed 250 m3h-1 / 148 ft3min-1
Capacity at 10 mbar (7.5 Torr) 230 m3h-1 / 135 ft3min-1
Ultimate vacuum <0.015 mbar / <0.011 Torr
Maximum back pressure - standard 1,200 mbar / 2.7 psig
Power consumption at 10 mbar (7.5 Torr) 3.8 kW / 5.1 hp
Standard motor  
(200 - 230V ±10%, 3 ph, 50/60 Hz) 7.5 kW
Standard motor  
(380 - 460V ±10%, 3 ph, 50/60 Hz) 10 hp
Cooling water flow rate, (adjustable) 4 - 10 l min-1 /
  1.1 - 2.6 gal min-1
Cooling water temperature  
5 - 25 ºC (41 - 77 ºF) for T160 set-ups 5 – 35 oC / 41 – 95 oF
Max cooling water supply pressure 6.9 barg / 100 psig
Cooling water supply differential pressure 1.6 - 5.5 bar / 23 - 80 psi
Seal purge flow (max) 12 std lmin-1 /
  0.424 std ft3min-1
Seal purge supply pressure, (min - max) 2.5 -6.9 barg / 36 - 100 psig
Noise (max) with silencer 64 dB(A)
Weight (with frame and standard motor) 470 kg / 1,034 lbs
Process connection, inlet 3''/DN80 ANSI/DIN
Process connection, outlet 2''/DN50 ANSI/DIN

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version