Hard anodized rectangular transfer valve technical data
|
Spindle sealing |
Bellows |
|
|
Life Cycle |
1,000,000 cycles |
|
|
leak rates |
Body |
5 x 10-6 mbar.l/s |
|
Surface Treatment |
Hard anodized |
|
|
Bakeable Temperature |
Body |
<90¡æ |
|
Drive member |
<60¡æ |
|
| Differential pressure on the gate(Note*) |
Positive pressure difference |
¨Q 120KPa |
| Reverse pressure difference |
¨Q 100KPa |
|
|
Differential pressure at opening(Note**) |
<10 mbar(0.01bar) |
|
|
Pressure Range |
1* 10-6 mbar to 1.0 bar |
|
|
Drive mode |
Pneumatic 5~7 Kg/cm² |
|
|
Standard Seal |
Gate |
Viton® O'ring |
|
Open/Close sensor |
DC4-24(V) or AC4-240(V), 5-40 ma |
|
|
Solenoid Power |
DC24(V) ,AC24(V),AC110(V),AC220(V) |
|
|
Mounting position |
Actuator up or down |
|
Note:
(* ) Differential pressure on the gate
Positive and negative pressure difference definitions:
Positive pressure difference ( P1 > P2) = P1-P2
Reverse pressure difference (P1 < P2) = P2-P1
(**) Differential pressure at opening = P1 – P2 < 10 mbar(0.01bar)
Accessories
| A | B | C | D |
|
32x222¡¡M8x50L |
PIN Φ10x15L |
Clamp single Part No:2121A211 |
Maintenance of the fixture Part No: GR03A213323 |
