615 MHR (Bare shaft) Horizontal flow 900615MHR
Quantity
Overview:
Edwards Superblowers are designed to be used in conjunction with rotary-piston, liquid ring, rotary vane and dry vacuum pumps to increase pumping speed at working pressures and shorten pump down time significantly. The Superblower can be mounted separately or on the inlet of the backing pump to create a compact integrated package.
Featuring an extra large diameter shaft, the 6” Superblower has the capability for use with higher powered motors in addition to ensuring a uniquely rugged and durable mechanical booster. This allows the pumps to operate at their full displacement from atmospheric pressure with an appropriately sized backing pump.
The Superblower must be backed by a primary vacuum pump designed to discharge to atmospheric pressure. Examples of suitable backing pumps are listed below:
GV Drystar or Chemical Drystar dry pumps
Two stage LR series liquid ring pumps
RV, EM or EVC oil sealed pumps
Microvac series piston pumps
The bare shaft Superblower should be connected to a suitable V belt or direct drive motor. Contact Edwards for advice.
Features & Benefits:
Technical Data:
Edwards Superblowers are designed to be used in conjunction with rotary-piston, liquid ring, rotary vane and dry vacuum pumps to increase pumping speed at working pressures and shorten pump down time significantly. The Superblower can be mounted separately or on the inlet of the backing pump to create a compact integrated package.
Featuring an extra large diameter shaft, the 6” Superblower has the capability for use with higher powered motors in addition to ensuring a uniquely rugged and durable mechanical booster. This allows the pumps to operate at their full displacement from atmospheric pressure with an appropriately sized backing pump.
The Superblower must be backed by a primary vacuum pump designed to discharge to atmospheric pressure. Examples of suitable backing pumps are listed below:
GV Drystar or Chemical Drystar dry pumps
Two stage LR series liquid ring pumps
RV, EM or EVC oil sealed pumps
Microvac series piston pumps
The bare shaft Superblower should be connected to a suitable V belt or direct drive motor. Contact Edwards for advice.
Features & Benefits:
- Mechanical shaft seal offers improved life and serviceability
- Ringfeder® keyless gear locking system provides stronger, faster timing
- Drive end roller bearing which resists belt pull and thermal effects
- Over-sized anti-friction bearings allows increased uptime and longer service intervals
- Horizontal gas flow configuration
- Belt drive or Direct drive capability
- Rugged proven design and construction
- Large shaft diameters allowing improved performance at high pressures
- Quiet operation
- Unique impeller design which is dynamically balanced to minimize vibration
- High volumetric efficiency
- High differential pressure offering operation capability
Technical Data:
| Horizontal flow | Vertical flow | |
| Displacement V belt (2750 rpm) | 3375 m3h-1 / 2000 ft3min-1 | 3375 m3h-1 / 2000 ft3min-1 |
| Displacement direct drive (1800 rpm) | 2210 m3h-1 / 1300 ft3min-1 | 2210 m3h-1 / 1300 ft3min-1 |
| Displacement direct drive (3000 rpm) | 3685 m3h-1 / 2170 ft3min-1 | 3685 m3h-1 / 1170 ft3min-1 |
| Displacement direct drive (3600 rpm) | 4420 m3h-1 / 2600 ft3min-1 | 4420 m3h-1 / 2600 ft3min-1 |
| Inlet/outlet flanges | 8” ASA/ANSI flange | 8” ASA/ANSI flange |
| Motor option US TEFC | 10 hp | 10 hp |
| By-pass available | No | No |
| Cooling water | No | No |
| Oil capacity | 1.9 liter / 0.51 gal | 4.1 liter / 1.1 gal |
| Max pressure differential | 506 mbar / 380 Torr | 506 mbar / 380 Torr |
| Max temp rise | 135°C / 275°F | 135°C / 275°F |
| Max discharge temp | 191°C / 375°F | 191°C / 375°F |
| Foot print TEFC direct drive (L x W x H) | 1391 x 406 x 543 mm | 1391 x 543 x 406 mm |
| 54.75 x 16 x 21.4 in | 54.75 x 21.4 x 16 in | |
| Weight TEFC direct drive | 390 kg / 860 lbs | 390 kg / 860 lbs |
